PORSCHE 911 THROTTLE
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1994-98 (includes uncategorized and accessory items)
This replica high butterfly mfi throttle bodies system is for those looking for ultimate engine performance as well as an authentic rsr engine appearance. This kit keeps air consistently on tap for superior drivability. When the throttle is opened, there is an instant injection of air, providing a sharp, crisp throttle response. This efficient injection frees up more power and compliments larger displacements, high lift cams and full exhaust systems. This kit is engineered, precision machined, flow tested and manufactured in Germany. It is replicated to look as close to the original as possible. Intake trumpets (velocity stacks) are available in your choice of red or black. Includes: 6 individual stacks (50 mm ...(choose a part on the right to read more)
$7,456.90
Make a selection
This replica high butterfly mfi throttle bodies system is for those looking for ultimate engine performance as well as an authentic rsr engine appearance. This kit keeps air consistently on tap for superior drivability. When the throttle is opened, there is an instant injection of air, providing a sharp, crisp throttle response. This efficient injection frees up more power and compliments larger displacements, high lift cams and full exhaust systems. This kit is engineered, precision machined, flow tested and manufactured in Germany. It is replicated to look as close to the original as possible. Intake trumpets (velocity stacks) are available in your choice of red or black. Includes: 6 individual stacks (50 mm ...(choose a part on the right to read more)
$7,456.90
Make a selection
From $10.00
Make a selection
The stock exhaust of the Porsche 997.2 turbo is very restrictive compared to aftermarket systems. Porsche does this to meet sound and emission purposes like most OEM manufacturers. agency power set out to create an exhaust system for the new Porsche 997.2 turbo 6speed or pdk that did not drone, would produced amazing performance, and under throttle give an incredible sound. we have accomplished this! the new agency power exhaust not only saves about 30lbs off the rear end, it also improves power quite a bit.
With our single can muffler and 200cell high flow cats installed to the stock huge oval tips, we strapped our 2010 pdk to the dyno. The exhaust made a peak increase in standard mode of 15awhp and 23f...(choose a part on the right to read more)
$3,749.95
Make a selection
Product details:
Full exhaust system developed for track use provides an aggressive exhaust note while adding horsepower, torque, and throttle response; available as single or dual outlet and with or without heat exchange.
Features:
-fits all Porsche 993 Carrera vehicles (1994-1998)
-loud and aggressive cup car sound. Recommended for track use only.
-this system can be ordered in single- or double- outlet form; cap is provided for single-outlet use. Please specify.
-maintain your factory in-cabin heat with the optional heat exchange on the headers. Please specify.
-saves 43 from the rear of the vehicle when configured with heat option and saves 47 when config...(choose a part on the right to read more)
General Fitment 911 1994-98
From $2,595.00
Make a selection
High-performance x-pipe replaces the OEM catalytic converters straight through pipes for maximum flow and power.
Features:
Fits all Porsche 993 Carrera vehicles (1994-1998)
Adds 8 whp and 19 ft-lbs of torque greatly improving throttle response
Saves 11 lbs from rear of the car
Constructed from cnc mandrel-bent t304l stainless steel for maximum quality, performance and durability
Simply bolt-on installation; no cutting or welding required
Includes all required hardware and gaskets
All fabspeed performance products are backed by the fabspeed lifetime limited warranty
Optional 02 spacers available to minimize c.e.l occurrences (primary catbypass)...(choose a part on the right to read more)
General Fitment 911 1994-98
Full exhaust system developed for track use provides an aggressive exhaust note while adding horsepower, torque, and throttle response; available as single or dual outlet and with or without heat exchange.
Features:
Loud and aggressive cup car sound
General Fitment 911 1994-98
$4,707.65
Make a selection
Product details:
Direct bolt-on replacement for the factory air box providing increased airflow and power
Features:
-fits all 993 turbo / turbo s vehicles (1995-1998)
-improve sports car sound
-adds 10 whp and increases throttle response
-simple diy installation
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 1994-98
From $195.00
Make a selection
Loud and aggressive performance exhaust system recommended for track use only; replaces the restrictive factory mufflers with a free-flowing resonated design
Features:
Improves exhaust flow and sports car sound
Adds 15 whp greatly improving throttle response
Saves 11 bs from rear of car
Optimized for use at high-rpm during track and motorsport events
Complete t304l stainless steel construction; 14-16ga cnc mandrel-bent 2.25 tubing
Direct replacement for the factory mufflers
Includes removable turndowns that are easy on & easy off for lowering the exhaust volume when desired
All fabspeed performance products are backed by the fabspeed lifetime limited warranty
...(choose a part on the right to read more)
General Fitment 911 1994-98
From $1,095.00
Make a selection
Our FVD exclusive line of clutch kits is culmination of Porsche genuine parts, zf sachs race engineering gmbh parts and motorsports parts that have been developed to work together without compromise. They offer a silky smooth release, superb drivability, can handle more torque (315 ft/lbs. / 425 nm max.) than comparable stage 1 type recommendations. We specifically chose a clutch disc with torsion springs that function as a vibration damper between engine and gearbox, in order to give you an effortless release in 1st gear. This kit is suited for daily use and offers a superior driving experience. Clutch kit includes everything needed for installation: 1 qty. Clutch disc 1 qty. Pressure plate 1 qty. Lightweight ...(choose a part on the right to read more)
General Fitment 911 1994-98 911 1989-94
From $2,234.41
Make a selection
Full exhaust system developed for track use provides an aggressive exhaust note while adding horsepower, torque, and throttle response; available as single or dual outlet and with or without heat exchange.
Features:
Loud and aggressive cup car sound
General Fitment 911 1994-98
$4,445.75
Make a selection
Product details:
Complete high-performance exhaust solution for the Porsche 993 turbo; fantastically daily drivable sound and power from fabspeed's supercup exhaust system, sportcat x-pipe, sport headers with heat, cup high performance air box cover, bmc f1 air filter and ecu tuning upgrade.
Includes:
993 turbo supercup exhaust system incl. Deluxe oval style tips
993 turbo sport cat x-pipe
993 turbo sport headers with heat
993 turbo cup high performance air box cover
993 turbo bmc f1 air filter
993 turbo ecu tuning upgrade
Features:
-fits all Porsche 993 turbo / turbo s vehicles (1995-1998)
-constructed from t304 stainless steel, c.n.c. Mandrel bent tubing for maxim...(choose a part on the right to read more)
General Fitment 911 1994-98
From $7,750.00
Make a selection
Up to 11kw (15hp) more power (depending on model)
Ecu exchangeable chips for us models are only for 1995 and earlier models available.
Order for 1996 and later vehicles FVD 993 618 70 ecu programming.
Please specify octane ratio (example: europe 98, us 91 or 93)
All our motronic upgraded programs are extensively tested for dyno proven performance as well as daily driver reliability. Each upgraded motronic carries 12 months warranty. If not completely satisfied, return within 14 days. Every upgraded motronic is provided with complete instructions which make do-it-yourself installation easy.
We program our ecu's with the following modifications in mind:
-removal of the top speed limiter
-increas...(choose a part on the right to read more)
General Fitment 911 1994-98
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced
FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The remanufacturing process starts with re-profi...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,506.75
Make a selection
Kit includes:
Sport-motronic dme exch., power-flow kit
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in h...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Replace your restrictive air box and filter with a powerflow kit for improved air volume and velocity, and increased horsepower. A better breathing engine also gives you faster throttle response. Each design has been flow bench and engine dyno tested to assure maximum performance. Powerflow kits include the powerflow intake unit, lifetime air filter, instructions, and all hardware.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
Replace your restrictive air box and filter with a powerflow kit for improved air volume and velocity, and increased horsepower. A better breathing engine also gives you faster throttle response. Each design has been flow bench and engine dyno tested to assure maximum performance. Powerflow kits include the powerflow intake unit, lifetime air filter, instructions, and all hardware.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
Power gains: + 15 hp & + 13 lb. Ft of torque
Highlights:
- software performs flawlessly on your 96' model year ecu's ! So you don't have to purchase 97' and newer ecu's which are extremely expensive!
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight flywheels, bypass - 100 cell - 200 cell exhausts, etc.)
- customizable for octane (please let us know what octane you are running example: europe 98, us 91 or 93)
Please note:
You will need to give us the Bosch number and Porsche number off of the ecu prior to sending the ecu to us to ensure what control unit you have. The reason is 1996 model year ecu eprom's could only be fl...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Stock:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Software tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
Highlights:
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight flywheels, bypass - 100 cell - 200 cell exhausts, etc.)
- customizable for octane (please let us know what octane you are running example: europe 98, us 91 or 9...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Stock:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Software tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
Highlights:
- software performs flawlessly on your 95' and 96' model year ecu's ! So you don't have to purchase 97' and newer ecu's which are extremely expensive!
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight fly...(choose a part on the right to read more)
General Fitment 911 1994-98
$3,294.50
Make a selection
Rennline billet aluminum solid engine mount Porsche 997 05+
Solid engine mounts are a smart upgrade to any track or aggressive street car, and are installed on Porsche factory race cars. Stock mounts are made of compliant rubber, and contribute to imprecise shifting and inferior throttle response. Solid mounts create slightly more interior vibration than rubber mounts, but securely connect the engine and transmission assembly to the cars unibody, creating a crisper throttle response and shifter feel. Billet engine mounts will give your vehicle a more solid, predictable feel on the track. Rennlines solid mounts are cnc machined from 6061 aluminum for strength and light weight, and come as a pair with new ...(choose a part on the right to read more)
General Fitment 911 1989-94 911 1994-98 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11
From $306.90
Make a selection
"brombacher" 987-2/s (sound version) stainless steel exhaust system
Facts:
- + 20 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2" tubing (50 mm) straight through design for max. Power
- weighs 57 lbs. (25,8 kg)
- t 316 stainless steel for improved durability over t 304
- dual 3.5"(90mm) round tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts...(choose a part on the right to read more)
$7,420.60
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|